AEROFLOW

Aeroflow Intercooler Aluminium Pipe Clamps are made from billet 6061-T6 lightweight aluminium. It features a double O-ring grooved sleeve offering absolute sealing with maximum flexibility, so you never have to worry about blowing a pipe off again! Easy bolt together quick release design outer ring ..

Oil Cooler Rows: 25Oil Cooler Depth: 51mmOil Cooler Length: 330mmOil Cooler Height: 193mmOverall Height: 255mmOverall Depth: 150mmElectric Fan: 7" DiameterElectricFan Height: 68mmConnections: -10 Female ORB Threads.BTU Rating: 45000BTU /hourFor use in engines, transmissions,hydraulic systems, etc.Ma..

495cc/min @ 3 bar ( 43.5psi )Bosch 0 280 158 187Single cone spray patternShort Body length 33.6mmOverall Length 50.30mmInjector diameter 14mmHigh Impedance ( 12 ohms )E85 / Alcohol compatibleUSCAR connector - AF49-1523direct fit LSA/LS3 gm12598646..

The Aeroflow Performance fluid cooler is great for those wanting to keep your auxiliary fluids down in temperature under extreme conditions. This will work great for fuel or power steering applications.These cooler feature 1/2" (12.70mm) copper tubing expanded into aluminium cooling fins with extrud..

Aeroflow Performance quick and easy adapting solution when fitting injectors that have a EV1 plug and the engineharness has a Honda injector plug.End To End Length: 100mm (3-5/16")..

Quick and easy adapting solution when fitting injectors that require a USCARplug and the engine harness has Nissan injector plugs. Endto End length : 100mm (3-15/16")...

Aeroflow Performance quick and easy adapting solution when fitting injectors that have a DENSO plug and the engine harness has a USCAR injector plug.End To End Length: 100mm (3-5/16")..

Aeroflow Performance quick and easy adapting solution when fitting injectors that have a DENSO plug and the engine harness has a BOSCH injector plug.End To End Length: 100mm (3-5/16")..

Quick and easy adapting solution when fitting injectors that require a Toyota 1ZZ or 2ZZ plug and theengine harness has Denso injector plugs. End to end length is 100mm...

Quick and easy adapting solution when fitting injectors that have a USCAR plug and the engine harness has Bosch Injector plugs. End to end length is 100mm...

Perfect for use with Aeroflow oil coolers, this billet aluminium dual port remote filter head and thermostat combines the engine oil filter and oil thermostat in one convenient unit. This is great for those wanting to remove extra lines and fittings required to run the thermostat in a separate locat..

These Aeroflow Performance Surge Tanks are designed to prevent starving the fuel pump/s by increasing the fueling capability of the fuel system. It is usually installed in vehicles that potentially can experience fuel starvation due to fuel sloshing around in an inadequately baffled fuel tank/cell. ..

Internal Diameter - 3/8" (10mm)Wall Thickness - 5mmOutside Diameter - 20mmSuits Worm Drive Clamp - AF23-1625..

Internal Diameter - 1/2" (13mm)Wall Thickness - 5mmOutside Diameter - 23mmSuits Worm Drive Clamp - AF23-1832..

Copper Nuts for Turbo Studs.These copper locking nuts from Aeroflow are used inconjunction with our exhaust studs. The lock nut is just like a standard nut, but it has the added function of locking itself to the stud (thread). The main benefit of using lock nuts is once installed the chances of it w..

Aeroflow's 200 Series PTFE fittings are a CNC machined one piece fitting which provides uninterrupted flow. The purpose designed olive compresses into the PTFE (Teflon®) inner tube for easy, leak free assembly. The body has superior wall thickness and a swivel head allowing for easy adjustment. Aero..

Aeroflow's 200 Series PTFE fittings are a CNC machined one piece fitting which provides uninterrupted flow. The purpose designed olive compresses into the PTFE (Teflon®) inner tube for easy, leak free assembly. The body has superior wall thickness and a swivel head allowing for easy adjustment. Aero..

All fabricators know that more often than not the most time-consuming aspect of fabricating a turbo manifold is making the merge collector!The Aeroflow Performance turbomerge collector range will save you hours of labor when fabricating a manifold and no more wasting material trying to figure out op..

547cc/min @ 3 bar ( 43.5psi )Bosch 0 280 158 279Wide dual cone spray patternLong Body length 60.65mmOverall Length 65.50mmInjector diameter 14mmHigh Impedance ( 12 ohms )E85 / Alcohol compatibleUSCAR connector - AF49-1523..

The Aeroflow Performance Subaru fuel rail is specifically designed to suit Subaru WRX, STI, Forester and Liberty models with EJ20 or EJ25 engines which feature a top feed injector and to suit AVCS solenoid (except for the early style vertical plug style). Proper fuel delivery is arguably one of the ..

The Aeroflow Performance Subaru fuel rail is specifically designed to suit Subaru WRX, STI, Forester and Liberty models with EJ20 or EJ25 engines which feature a top feed injector and to suit AVCS solenoid (except for the early style vertical plug style). Proper fuel delivery is arguably one of the ..

The Aeroflow Performance Subaru fuel rail is specifically designed to suit Subaru WRX, STI, Forester and Liberty models with EJ20 or EJ25 engines which feature a top feed injector and to suit AVCS solenoid (except for the early style vertical plug style). Proper fuel delivery is arguably one of the ..

Suits the following applications:- GM LS Series Engines.When installing a new flywheel, it is recommended to replace your flywheel bolts as the old factory ones can fatigue over time. These Aeroflow flywheel bolts are made from chrome moly 8740 for high strength compatibilities. They are black oxide..

The Aeroflow harmonic balancer bolt is designed to suit Nissan RB26 engines. Manufactured from aircraft quality 8740 high tensile strength chromoly steel and cold-forged to ensure molecular integrity within the stud. Meaning these are rated up to 190,000 psi making them stronger than Grade 8 and OEM..

A simple striaght Female toMale AN adapter fitting that also features a M10 x 1.00mm auxilliary port that can be used for sensors, sender unitsor a gauge. Specifically designed to Bosch Pressure/Temperature Sensor (AF49-1554)(Bosch Part Number 0261230340). Available in either -3AN or -4AN in 304 sta..

A simple striaght Female toMale AN adapter fitting that also features a M10 x 1.00mm auxilliary port that can be used for sensors, sender unitsor a gauge. Specifically designed to Bosch Pressure/Temperature Sensor (AF49-1554)(Bosch Part Number 0261230340). Available in either -3AN or -4AN in 304 sta..

The Aeroflow Performance single layered aluminium embossed heat shielding is most effective way to control and manage radiant heat in any application. it can cut the effects of radiant heat by up to 90% to protect vital components in your vehicle from heat soak. This shielding is easy to cut with ti..

The Aeroflow Performance single layered aluminium embossed heat shielding is most effective way to control and manage radiant heat in any application. it can cut the effects of radiant heat by up to 90% to protect vital components in your vehicle from heat soak. This shielding is easy to cut with ti..

The Aeroflow Performance single layered aluminium embossed heat shielding is most effective way to control and manage radiant heat in any application. it can cut the effects of radiant heat by up to 90% to protect vital components in your vehicle from heat soak. This shielding is easy to cut with ti..

This adapter flange allows you to adapt a Bosch Drive By Wire 68mm 4-bolt throttle bodyto a Nissan SR20 standard intake manifold. This is a great upgrade for the older cable driven throttle body. Suits Bosch 68mm DBW AF64-2147or Bosch 0 280 750 156...

Model - Honda K Series Engine turbo steampipe manifold. Uinversal fitment for most model Honda Civic and DC2 Integra. Will not fit DC5/EP3 or early ED/EFcivic without modifications. K24 engine conversions will interfere with the heater pipeand will require minor modifications to fit this manifold.Tu..

The max RPM limit of aftermarket alternators can bearound the 18000 alternator RPM mark. This works great formost factory applications until you start building engines that exceed factory RPM. Once the alternator reaches its max RPM it stops charging and your voltage drops, as well as potentially re..

The Aeroflow Performance 450 LPH Hi-flow in-tank efi fuel pump features an internal CHECK VALVE to allow users to stage 2 and/or 3 fuel pumps in our triple fuel pump hangers. For such a compact and small design this fuel pump is capable of flowing 113.6 GPH (450 LPH) @ 29 Psi. With such a small and ..