ECU HARNESS & ADAPTERS

DescriptionUSB-CAN converter used with FT line modules (FT200, FT250, FT300, FT350 and FT400) for updating and communication with the computer (map editing, backup).Update of products that have CAN Editing maps and injection settings Downloading data from the Internal Datalogger Compa..

Robust and easy-to-install aluminum handle, sensor for GearController* already installed.Available in 4 thread patterns , compatible with various levers, including original ones:  M12 x 1.50 VW Gol LineM12 x 1.75 AG LeverM10 x 1.25 Mitsubishi EVO 3/8 x 24 UNF Chevrolet Opala LineSimpl..

Robust and easy-to-install aluminum handle, sensor for GearController* already installed.Available in 4 thread patterns , compatible with various levers, including original ones:  M12 x 1.50 VW Gol LineM12 x 1.75 AG LeverM10 x 1.25 Mitsubishi EVO 3/8 x 24 UNF Chevrolet Opala LineSimpl..

Robust and easy-to-install aluminum handle, sensor for GearController* already installed.Available in 4 thread patterns , compatible with various levers, including original ones:  M12 x 1.50 VW Gol LineM12 x 1.75 AG LeverM10 x 1.25 Mitsubishi EVO 3/8 x 24 UNF Chevrolet Opala LineSimpl..

Robust and easy-to-install aluminum handle, sensor for GearController* already installed.Available in 4 thread patterns , compatible with various levers, including original ones:  M12 x 1.50 VW Gol LineM12 x 1.75 AG LeverM10 x 1.25 Mitsubishi EVO 3/8 x 24 UNF Chevrolet Opala LineSimpl..

DescriptionThe ready-made harness for FT450  and FT550 6 cylinders provides greater practicality and speed when assembling your car.Designed to meet all connections of GM Opala 6 cylinder engines , the ready-made harness has several connections so that its installation is quick , simple and wit..

DescriptionThe ready-made harness for FT450  and FT550 6 cylinders provides greater practicality and speed when assembling your car.Designed to meet all connections of GM Opala 6 cylinder engines , the ready-made harness has several connections so that its installation is quick , simple and wit..

DescriptionThe ready-made harness for F T450 and FT550 4 cylinders provides greater practicality and speed when assembling your car.Designed to meet all 4-cylinder engine connections, the ready-made wiring harness has several connections so that installation is quick, simple and with a high-quality ..

DescriptionThe ready-made harness for F T450 and FT550 4 cylinders provides greater practicality and speed when assembling your car.Designed to meet all 4-cylinder engine connections, the ready-made wiring harness has several connections so that installation is quick, simple and with a high-quality ..

Note: To use this product you need a SparkPRO-3 Nautical/Off-Road, FT600 and NanoPRO. The Plug and Play Harness makes installing an FT600 and a NanoPRO in Can-Am UTVs (from 2017 to 2020 and 2021 to 2023) a quick and easy task to return to originality, as it uses the vehicle's original harness, witho..

ADVANTAGES:Super easy installationReturning to the original is easyMap available on website (ready to plug in)ResistantFEATURES:Complete configuration (absolute tuning capability), no need to change the original ECU, easy to revert:InjectionIgnitionElectronic throttle/idle controlBLIP/Punta Tac..

The wiring harness for Honda motorcycles (Honda CB250F Twister, CRF250F, CRF250L, Grom 125, Nova Tornado 300, CB300F Twister, Rebel 300, CB300R, XRE300, CG150 Mix, CG160, Pop 110i, Biz 110i, Biz 125, Bros 150, Bros 160, Bros 190, XRE 190, and many others with PGM FI ECU, consult our technical suppor..

DESCRIPTION:The Plug and Play installation harness for VW/Audi 1.8 150HP with cable throttle, was created to facilitate the installation of an FT450 or FT550 ECU in vehicles that use the Bosch M3.8.2 injection module, just connect some connectors and start.The harness allows FuelTech to operate in c..

Jumper Peak & Hold is used with the FT line in injector harnesses with high impedance (1 to 4 injectors)...

Harness for PEAK AND HOLD PRO INJECTOR DRIVERTECHNICAL SHEETLength: 2mNumber of lanes: 26..

Peak and Hold harness. Compatible with all models.Length: 2mNumber of lanes: 10 ..

Harness for FTSPARK EXTREME (Compatible with 6 and 8 cylinder engines, for these engines it is necessary to use two FTSPARK EXTREME modules, the EXTREME harness has two connectors to insert into each module).Length of the electrical harness: 1.5 meters at the power outputs connected to the coils and..

Harness for FTSPARK-8 750mJLength of the electrical harness: 1.5 meters at the power outputs connected to the coils and 3 meters at the other cables.Number of tracks: 35 strands..

Harness for FTSPARK-6 750mJ Length of the electrical harness: 1.5 meters at the power outputs connected to the coils and 3 meters at the other cables.Number of tracks: 29 strands ..

Harness for FTSPARK-4 750mJ Length of the electrical harness: 1.5 meters at the power outputs connected to the coils and 3 meters at the other cables.Number of tracks: 23 wires..

DescriptionProgrammable power via CAN or input for power level adjustment 475V voltage on the coil primary, which helps prevent interference in the system 175 Amp primary coil current with FuelTech Racing CDI coil for FTSPARK 1500mJ CAN communication with the FuelTech Power FT line fo..

DescriptionHarness B for FT550 * is used for new installations.*The complete wiring harness for FT550 consists of the following harnesses: FT450/FT550- A Harness + FT550- B Harness (this product)Both available in 3 or 6 meters length.Technical SheetFT550 B harness:1 26-way FT550 SUPER..

The FT550 2008-2017 Yamaha 1800 Harness (3 plug), designed by FuelTech, is the perfect solution for FuelTech ECU installation using the OEM harness.The FT wiring harness has all necessary components for easy and fast FT550 ECU installation.This wiring harness plugs directly to the OEM harness. There..

Unterminated harness for FT450/550 A connector...

DescriptionHarness A for FT450 and FT550 * is used for new installations.*The complete harness for FT550 is composed of the harnesses:FT450/FT550- A harness (this product)+FT550 – B harness (exclusive for FT550)Both available with 3 or 6 meters in length.Technical SheetFT450 and FT550 A harness:1 FT..

Single harness for use in conjunction with the Input Expander..

FeaturesThe FT Input Expander is an input expander module for the PowerFT line (FT500 / FT500LITE / FT450* / FT550 / FT550LITE / FT600). It has 20 inputs for sensor readings (such as: pressure, flow, temperatures, position and activation of functions through switches or buttons), and 4 inputs for re..

DescriptionThe FT Dual Power Driver is a current amplifier that allows you to use the ECU's low current outputs to power electrical systems that require greater electrical current capacity.The DPD can control electronic wastegates and other actuators that require up to 25A, consult our technical sup..

DescriptionThe FuelTech EGT-4 CAN is compatible with any Type K thermocouple (grounded and ungrounded junction).4-channel conditioner for K-type thermocouple with CAN communication with PowerFT ECUs, which can be used to read exhaust gas, oil, air, water, spark plug temperatures or any temperature w..

Terminated Engine Harness connects directly to the Nexus R5 VCU and supports most popular big block and small block V8 engines from GM, Ford and Chrysler.Harness requires Injection, Ignition and alternator Sub Harnesses - Sold seperately.Injector breakoutsHT-186000 V8 Primary Injector EV1HT-186001 V..

Suits: Nexus PD16Includes: Wire in Harness, 5 meters (16ft) in Length - Suits Nexus PD16..

Terminated Harness for use with the Rebel LS ECUInjector breakoutsHT-186000 V8 Primary Injector EV1HT-186001 V8 Secondary Injector EV1HT-186002 V8 Primary Injector USCARHT-186003 V8 Secondary Injector USCARIgnition breakoutsHT-186060 Nexus V8 Ford IGN1AHT-186061 Nexus V8 GM IGN1AAlternator breakouts..